BDS Suspension 2" Radius Arm Suspension Lift for 2011-16 Ford F250 and F350 4WD DIESEL
Following hot-on-the-heels of our recent 1622H 2013-up Ram 3500 3"
kit, this new radius arm systems looks to put similar levels of
performance in the 2011-16 F250s. Like the Ram kits, this new system is
built around massive tubular replacement radius arms. These arms are
built to handle far more than the factory parts they are replacing. The
design incorporates a factory style rubber bushing mount at the frame to
keep the NVH levels in check. The 3-1/4" diameter bushings are huge and
have a long, maintenance-free service life. The new radius arms mount
right into the factory locations so installation is simple and clean.
Alignment cam locks are included that allow for caster adjustability,
something the factory arms do not provide. The arm geometry is set to
keep the axle angle in the factory specs while compensating for the 2.5"
of lift. A copper-anodized aluminum BDS name plate is mounted each arm.
addition to the heavy-duty, high-performance radius arms, this new
system features dual-rate front coil springs that improve the ride and
handling of these 3/4 ton trucks both on and off road. Our popular
heavy-duty turnbuckle style adjustable track bar is included to center
the axle. Front brake line relocation brackets included and a choice of
NX² series or FOX 2.0 Performance Series shocks are available.
rear system utilizes a 4" block with an integrated bump stop wing to
replace the factory 2" blocks, leveling out the back with the newly
- Tire & Wheel Combinations
- 35" x 12.50" w/17 x 9 and 5" back spacing
- 35" x 12.50" w/18 x 9 and 5" back spacing
- 35" x 12.50" w/20 x 9 and 5" back spacing