EVO MFG 2.5” JL Enforcer Lift Suspension Systems lift your 2018+ Jeep
Wrangler JL 2.5”s. Our main goal in developing this kit was to give a
smooth ride on and off road while giving additional lift with increased
performance. The JL Enforcer kits are specifically designed to lift
your JL and maintain compliant spring rate, smooth ride quality while
having the option of retaining factory shocks, maintaining full wheel
travel with use of shock extensions (part number
EXT kits) or without shock extensions to allow for use of your choice of
aftermarket 2/2.5” lift shocks. These kits come with a set of 2.5”
Plush Ride Lift springs specific to each corner which will keep the Jeep
Wrangler JL Level side to side and will maintain a unique and compliant
ride quality. EVO MFG JL Enforcer kits are available in multiple
configurations to suit your needs and budget and are upgradable down the
road. These Enforcer kits will fit up to a 37” tires on Rubicon Model
JLs or 35” tires on Sahara and Sport/S.
What are the JL Enforcer OVERLAND Systems, EVO-3012 Kits?
difference with EVO MFG Enforcer Overland systems (EVO-3012s) vs EVO
MFG Enforcer systems (EVO-3011s) is the use of front Overland Control
Arm Brackets. When lifting your vehicle your control arms at ride
height have a steeper angle towards the floor which can have some negative effect/chop in ride quality. With
the use of the included Overland Control Arm brackets we relocate the
front control arm mounting locations at the frame. In doing this when
lifted we maintain factory flatter control arm angles and while minimal,
we alleviate much of the chop associated with lifting a Jeep giving even better and more improved ride quality. Also, in the use of Overland Drop Brackets we are able to engineer more performance into the front suspension to improve braking
and driveline angles through suspension cycle. Both kits drive very
well, the Overland Kits are better suited for less hard off-road
crawling and more light off road and on road use.
EVO MFG 2.5" JL Enforcer Overland Kits are easy to install using normal
tools. No drilling or cutting (optional rear shock extensions require
one minor drill). They require no driveshaft or exhaust modifications
(your shock choice may require this, contact manufacturer to be sure).
Simple Bolt on installation.
lift is based on increase of a 4 Door Rubicon. 4 Door Sport and Sahara
Models will see slightly higher increases over stock and will match
overall lift height of a Rubicon Model. 2 Door Models (all) will see
slightly higher increases in lift. Increases will vary.
Stage 1 kits includes all the necessary parts to lift your JL 2.5”s.
Stage 2 kits includes Stage 1 components as well as EVO MFG Enforcer JL
Front Lower Adjustable Control Arms to allow for caster adjustments.
Stage 3 Kits includes stage 2 components as well as EVO MFG Enforcer
rear upper adjustable control arms for rear pinion angle adjustment
Stage 4 kits includes stages 1 components with all 8 EVO MFG Enforcer
control arms for full front and rear axle adjustments.
*All part number “EXT” kits include front and rear shock
extensions. Retaining factory shocks while maintaining full wheel travel
on actual tire variances and sizes, Some minor factory inner liner
plastic may need to trimmed/removed to fully clear some tires under
compression. These kits require wheel spacers or aftermarket wheels
with smaller backspacing.