EVO MFG JL 3.5" Enforcer OVERLAND Lift Stage 2 with EVO SPEC KING Shocks

EVO MFG JL 3.5" Enforcer OVERLAND Lift Stage 2 with EVO SPEC KING Shocks

Your Price: $3,556.57
Retail Price:$3,912.23
Your Savings:$355.66(9%)
Typically Ships in 5-7 Business Days
Free Shipping
Part Number:EVO-3014S2K
The EVO MFG 3.5” JL Enforcer Lift Suspension Systems lift your 2018+
Jeep Wrangler JL 3.5”s. Our main goal in developing this kit was to give
a smooth ride on and off road while giving additional lift with
increased performance.  The JL Enforcer kits are specifically designed
to lift your JL and maintain compliant spring rate, smooth ride quality
while having the option of retaining factory shocks, maintaining wheel
travel with use of shock extensions (part number EXT kits) or without
shock extensions to allow for use of your choice of aftermarket 3-5”
lift shocks. These kits come with a set of 3.5” Plush Ride Lift springs
specific to each corner which will keep the Jeep Wrangler JL Level side
to side and will maintain a unique and compliant ride quality. EVO MFG
JL Enforcer kits are available in multiple configurations to suit your
needs and budget and are upgradable down the road. These Enforcer kits
will fit up to a 39” tires on Rubicon Model JLs or 37” tires on Sahara
and Sport/S (Larger tires clearance with aftermarket fenders or trimmed
factory fenders).  3.5” kits come with raised rear trackbar track to
center axle and correct roll center for improved handling.  What are the
JL Enforcer OVERLAND Systems, EVO-3012 Kits?  The difference with EVO
MFG Enforcer Overland systems (EVO-3012s) vs EVO MFG Enforcer systems
(EVO-3011s) is the use of front Overland Control Arm Brackets.  When
lifting your vehicle your control arms at ride height have a steeper
angle towards the floor which can have some negative effect/chop in ride
quality.  With the use of the included Overland Control Arm brackets we
relocate the front control arm mounting locations at the frame.  In
doing this when lifted we maintain factory flatter control arm angles
and while minimal, we alleviate much of the chop associated with lifting
a Jeep giving even better and more improved ride quality.  Also, in the
use of Overland Drop Brackets we are able to engineer more performance
into the front suspension to improve braking and driveline angles
through suspension cycle.  Both kits drive very well, the Overland Kits
are better suited for less hard off-road crawling and more light off
road and on road use.  The EVO MFG 3.5" JL Enforcer Kits are easy to
install using normal tools. No drilling or cutting (optional rear shock
extensions require one minor drill). They require no driveshaft or
exhaust modifications (your shock choice may require this, contact
manufacturer to be sure). Simple Bolt on installation.  3.5” lift is
based on increase of a 4 Door Rubicon.  4 Door Sport and Sahara Models
will see slightly higher increases over stock and will match overall
lift height of a Rubicon Model.  2 Door Models (all) will see slightly
higher increases in lift.  Increases will vary.  Stage 1 kits includes
all the necessary parts to lift your JL 3.5”s.  Stage 2 kits includes
Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable
Control Arms to allow for caster adjustments. Stage 3 Kits includes
stage 2 components as well as EVO MFG Enforcer rear upper adjustable
control arms for rear pinion angle adjustment Stage 4 kits includes
stages 1 components with all 8 EVO MFG Enforcer control arms for full
front and rear axle adjustments.  *All part number “EXT” kits include
front and rear shock extensions. Retaining factory shocks while
maintaining full wheel travel  Note:  Depending on actual tire variances
and sizes, Some minor factory inner liner plastic may need to
trimmed/removed to fully clear some tires under compression.  These kits
require wheel spacers or aftermarket wheels with smaller backspacing. 
Adjustable Front Trackbar is required to complete proper installation,
not included.

Related Items