The FOX Performance Series Adjustable Through Shaft (ATS) steering
stabilizer offers unrivaled steering control and a striking high tech
appearance. The technologically advanced design cancels unwanted
steering forces in both directions, taking the place of two conventional
opposing stabilizers. It will also respond to your input with 24
clicks of external adjustment to fine tune the feel. The integrated
reservoir allows for additional fluid capacity and improves cooling
during extreme use. Also included is FOX's relocating hardware that
moves the steering stabilizer up and out of the way utilizing a new
track bar relocation bolt and tie-rod mounting clamp. The ATS
represents a revolutionary breakthrough in stabilizer design.
If installing stabilizer on 2012 and newer model with stock suspension
or with less than a 2.5’’ lift and aftermarket 1 1/4’’ bump stop
extension, the stabilizer reservoir must be rotated for clearance.
Loosen pinch bolt on L-bracket between stabilizer and track bar clamp,
rotate reservoir approximately 135 degrees down and toward rear of
Extended Length - 22.160"
Collapsed Length - 14.060"
Travel length - 8.100
** Special Note:
- 2.0 Performance Series ATS Stabilizer - 1-3/8" Stock Tie-Rod: 983-02-070
- 2.0 Performance Series ATS Stabilizer - 1-5/8” Tie Rod: 983-02-088