Poison Spyder BFH™ II Rear Bumpers are designed for those hardcore
four-wheelers who value strength, simplicity and function. This bumper
was literally "Built For the Hammers" with the best ground clearance and
departure angle possible. It is no wider than the Jeep JK Wranglers
rear body tub, with angled facets to improve its ability to slide over
the rocks while still protecting the corner of the tub from drop-offs
This version of the BFH II features CNC machined high
clearance recovery shackle tabs. For the ultimate in strength and
durability, pair it with the JK BFH™ II Rear Crossmember. The BFH™ II
Rear Bumper is CNC laser-cut from high strength 3/16" plate steel, then
precision brake-formed for an exact fit. In keeping with its minimalist
design parameter, the BFH™ II Rear Bumper has no provisions for a spare
tire carrier. This bumper is intended for those hard-core wheelers who
either wheel without a spare or strap the spare down into the bed of the
Jeep. It may also be compatible with the OE tailgate-mounted spare tire
carrier, depending on the size of the spare tire used.
The faceted plate steel design of the JK BFH™ II Rear Bumper provides
the most ground/obstacle clearance and best departure angle of any JK
rear bumper on the market. To achieve this, installation requires
trimming the bulky rear frame rails and stock bumper mounts. A laser-cut
steel template is provided to assist with making the right cuts. These
modifications include cutting into the stock rear crossmember. At the
installers discretion, the stock rear crossmember may be plated across
the open cut (materials to do this are not included), or the crossmember
removed completely. If the stock crossmember is removed completely, it may be replaced with the JK BFH™ II Rear Crossmember (note that there
are versions of the BFH™ II Crossmember with or without a receiver
hitch—this particular version of the BFH™ II Rear Bumper is specifically
designed to work with the receiver version—it will work with the
crossmember that has the integrated hitch receiver (p/n 17-17-030).
The JK BFH™ II Rear Bumper includes heavy duty, high clearance Recovery
Shackle Tabs. These tabs were CAD designed specifically for use with
this bumper, with a high-clearance design to minimize loss of departure
angle and to an-able sliding off of rocks rather than hanging up on them.
The tabs are CNC machined from 1" thick plate steel to provide a secure
attachment point for 3/4" recovery shackles (sold separately).
This specifc part
number includes recessed mounting tabs for a pair of high intensity
rearward-illuminating 6" LED light bars. The mounts were specifically
designed to fit the form factor of Rigid Industries SR-6 (single row,
6") LED light bars, which Poison Spyder recommends. However they should
fit any brand of single-row LED light bar that matches Rigid's 7-5/8"
mounting flange dimensions. The recessed mounting protects the LED
light bar behind the sturdy 3/16" steel shell of the BFH™ II bumper.
Installation requires cutting of stock frame rails! Please read through
the Installation Instructions so that you are fully aware of the
modifications required to your Jeeps frame rails, before purchasing.
This product ships as bare steel