The RockBrawler™ II is the latest evolution in JK rear bumpers, incorporating many features requested by customers, and product improvements born of real world use and testing of the original RockBrawler™. This bumper combines the best features to maximize performance on the toughest trails with some of the more refined traits not normally needed on a dedicated rock crawler. Its most prominent feature is the all new RockBrawler™ II Tire Carrier, which connects to the tailgate for easy, single-action opening. It's also slightly wider and deeper than the original RockBrawler™ for increased corner protection, and features an integrated hitch. This product ships as bare steel—it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.
Integrated Single-Action-Open Spare Tire Carrier
The RockBrawler™ II Spare Tire Carrier's Single-Action-Opening feature is a huge convenience for when you're trying to open the tailgate and tire carrier with one hand, when you've got an armload of gear or groceries in the other. Rather than latching to itself, the RockBrawler™ II tire carrier is tethered to the tailgate so that they open and close in tandem. A custom designed tie-rod assembly, bumper mechanism and Tramp Stamp™ keep the two pieces perfectly aligned when open, but tight and rattle-free when closed.
Tire Carrier Fabricated Plate Steel Construction
The RockBrawler™ II Spare Tire Carrier is fabricated entirely from CNC laser cut, precision brake-formed plate steel. The pieces are expertly welded together in a specially designed assembly fixture to ensure consistent fit and quality. A web gusset design is cut into the corner of the tire carrier to provide a little Poison Spyder flare.
Extreme Duty Hinge Assembly
The extreme duty hinge assembly includes a precision CNC machined spindle and housing, with a pair of high quality Timken tapered roller bearings to provide smooth operation under the heaviest loads A spindle seal at the bottom of the hinge assembly keeps your lubrication in, and dirt and water out. The hinge assembly is capped with a CNC machined billet aluminum cap with the Spyder emblem machined in.
2-Way Adjustable Tire Mount
The tire mount is adjustable up and down, as well as in and out, to accommodate a wide variety of tire sizes up to 39". The adjust-ability allows the tire to be mounted as low as possible for any tire size, to keep a low center of gravity.
License Plate Relocation Mount
The included license plate mount places the license plate at the center of the spare tire, for those who choose to move it there. Unlike the original RockBrawler™ rear bumper, the RockBrawler™ II Rear Bumper with Tire Carrier does NOT obstruct the placement of the stock license plate frame, so the installer may choose to leave it in the stock location or move it to the center of the rear tire using the included bracket. We recommend relocating it, as the stock mount sticks out significantly from the side of the Jeep and is just begging to be torn off by a rock along the trail. If relocating the license plate, our License Plate Delete Cover and LED License Plate & 3rd Brake Light (each sold separately) will be useful in completing the relocation.
Recessed Back-Up Lamps
Very few JK rear bumpers come with provisions for mounting backup lamps. Of those that do, fewer still allow the use of high intensity, low power drawing LED lamps. The RockBrawler™ Rear Bumper's recessed light buckets accept 2-1/2" Round, Clear LED Lamps—the same backup lamps we've sold with our Crusher Corners™. The recessed buckets protect them from the rocks and direct light rearward rather than into the bumper interior, the way some competitor's bracket-mounted lamps do. Customers may choose to wire them into the reverse light circuit, or wire them to a separate dash switch as a loading or utility light. IMPORTANT: Note that the LED Lamps do NOT come with this bumper, they must be purchased separately.
Integrated Hitch Receiver
The integrated hitch receiver accepts standard 2" hitches and recovery accessories. It is built in to the structure of the RockBrawler™ II Rear Bumper in order to provide a higher clearance, tougher hitch that's there when you need it, but tucked up higher out of the way for better clearance and departure angles on the trail. Includes integrated safety chain loops. IMPORTANT: The integrated hitch receiver is not rated for towing. It is intended as a recovery attachment point only.
Optional Hi-Lift Jack Mount
A custom Hi-Lift Jack Mount, available separately, is CNC laster cut and bolts to the top of the tire carrier. It features a distinctive web design to match the corner gusset detail on the RockBrawler™ II Tire Carrier, and mounts the Hi-Lift jack above and forward of the spare tire to keep it tucked up and away until needed.
Featuring Poison Spyder SpyderShell Black powder coat