Poison Spyder Customs BFH™ front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers"
with the best ground clearance, tire clearance and approach angle
possible. It is no wider than the Jeep's frame rails, with angled
facets to improve its ability to slide over the rocks. The BFH™ bumper
is CNC laser-cut from a single piece of high strength 3/16" plate steel,
then precision brake-formed for an exact fit. The BFH™ bumper features
an integrated winch mount and one-piece design.
This product ships as bare steel—it will need to be painted or powder
coated prior to final installation. We do not offer a powder coat
option for this item.
Customize your BFH™ bumper with several different Stinger/Bar options, Winch Fairlead Mount, and Heavy Duty Shackle Tabs:
The optional Brawler Bar is a lower-profile Stinger, fashioned
after the 2-bend Stinger featured on our Original RockBrawler bumper for
JK. The Brawler Bar features the most versatile combination of trail
protection and a lower profile for easier access to the engine
compartment, fitment into garages and trailers, etc. Plus it looks
bad-ass! The Brawler Bar extends 7.4" forward from the front edge of
the bumper, and 9.8" high from the top surface of the bumper.
The optional Trail Stinger™ is similar in proportion to the
famous Poison Spyder Trail Stinger™. This time-honored design has
proven itself on hundreds of Jeeps over the past decade, providing
simple, clean lines along with a measure of forward-flop protection.
The Trail Stinger™ extends 13.4" forward from the front edge of the
bumper, and 17" high from the top surface of the bumper.
The optional Comp Stinger™ for the BFH™ front bumper matches the
lines of our stand-alone Comp Stinger™s. For those getting into the
more hard-core aspects of the sport, the Comp Stinger™ provides even
better forward-roll prevention, as well as increased protection of the
radiator area and engine compartment in the event of a rollover. The
Comp Stinger™ extends 17.6" forward from the front edge of the bumper,
and 21.9" high from the top surface of the bumper.
The optional Recovery Shackle Tabs are machined from 1" thick
plate steel to provide a secure attachment point for 3/4" recovery
shackles. These tabs are specifically engineered to match the angles of
the BFH™ bumper to result in zero loss in approach angle.
The optional Winch Fairlead Mount is a separate piece (bolt-on,
not weld-on) that mounts between your winch and the BFH™ bumper to
provide a secure mounting surface for the winch fairlead (find it in the
"Related Items" section below).
The JK BFH Disco Skid is an optional bolt-on skid plate to
protect the factory electric swaybar disconnect motor on JK's. In stock
form this motor hangs low, making it vulnerable to rocks and trail
hazards. The BFH Disco Skid protects it, but also comes with hardware
and instructions to rotate the motor upward, further out of harm's way.
Like the BFH bumper, the Disco Skid is made of CNC laser-cut 3/16"
plate steel and is designed to be a great looking, functional addition
to the JK BFH bumper.
Whether you keep it simple or customize it with all the options, the
BFH™ front bumper is a serious bumper for hardcore wheeling!